ALTIS TERMITE RETICULATION SYSTEM
What is Altis?
It is a patented Reticulation System designed to effectively treat the area under concrete slabs, for protection against infestation by subterranean termites and around the external perimeter of structures to prevent termites entering from the outside of a building.
New and existing buildings can be protected from termites with the unique method of applying and replenishing a termite management system safely and reliably to all types of construction.
This treatment is easily applied during construction and after construction to protect the residence from a wide range of simple installation methods that are fully approved, Altis can protect all common building designs. Altis offers a long life treatment, where contact with termite management agent is eliminated such as spray drift and concrete workers breaking/ and or removing barriers.
What is different about Altis?
Unlike any other system which uses pipes which have been perforated, the Altis system uses flexible unperforated pipes, which have emitters fabricated into the pipe. These emitters distribute chemical at a measured rate, and is of particular advantage in difficult areas such as clay sites, uneven sand pads, and step-downs. The termiticide is induced at a low pressure, which combined with controlled rate emitters maintains an even distrution at all points along a pipe. Because of this "even flow" it is not necessary to balance each line in the system against other lines. Lines do not need to be similar length. A requirement of other systems. A further benefit is that each line can be run for up to 50 metres, making it possible to treat the entire circumference of most residences from one pump up point.
The use of emitters ensures no grit, roots from vegetation, or other form of intrusion will clog the pipe and render it ineffective.
Another unique, patented difference in the Altis system is that the pipes are laid over a perforated plastic membrane, beneath the builder's membrane. In this way chemical is distributed evenly and reduces the risk of any area being untreated.
WHY WAIT?............. For a FREE QUOTE CALL US NOW on (02) 9449 2948
or email us.
Areas We Service
SPS Pest & Handyman Services is located in Bayview and is ideally located to service clients in the north shore, northern beaches and north western suburbs of Sydney.